VSEn/Add DASD
To add DASD, you need to have it available on your FC SAN and have available FCP devices. For this, refer to your SAN documentation.
Then, in the define device screen, add a device, specify FBA SCSI and use the menus to provide the LUN and target WWN. Once this is done, reIPL.
Afterwards, you need to plot down a VTOC and init the DASD using ICKDSF. The following JCL template helps:
// JOB NEWDASD
// ASSGN SYS005,202
// ASSGN SYS006,203
// EXEC ICKDSF,SIZE=AUTO
INIT SYSNAME(SYS005) FBAVTOC(306176,228,8192) VOLID(CBR000) NOVFY
INIT SYSNAME(SYS006) FBAVTOC(306176,228,8192) VOLID(CBR001) NOVFY
/*
/&
Make sure to ONLINE the DASD first on the console.
Output should be similar to:
// JOB NEWDASD DATE 03/17/2
// ASSGN SYS005,202
// ASSGN SYS006,203
// EXEC ICKDSF,SIZE=AUTO
1S54I PHASE ICKDSF IS TO BE FETCHED FROM IJSYSRS.SYSLIB
ICKDSF - VSE DEVICE SUPPORT FACILITIES 17.0 TIME: 12:37:17
INIT SYSNAME(SYS005) FBAVTOC(306176,228,8192) VOLID(CBR000) NOVFY
ICK00700I DEVICE INFORMATION FOR 0202 IS CURRENTLY AS FOLLOWS:
PHYSICAL DEVICE = 9336-20
STORAGE CONTROLLER = 0000
STORAGE CONTROL DESCRIPTOR = 00
DEVICE DESCRIPTOR = 10
ICK01732I MAP FUNCTION NOT SUPPORTED FOR THIS DEVICE TYPE
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0
12:37:17 03/17/23
INIT SYSNAME(SYS006) FBAVTOC(306176,228,8192) VOLID(CBR001) NOVFY
ICK00700I DEVICE INFORMATION FOR 0203 IS CURRENTLY AS FOLLOWS:
PHYSICAL DEVICE = 9336-20
STORAGE CONTROLLER = 0000
STORAGE CONTROL DESCRIPTOR = 00
DEVICE DESCRIPTOR = 10
ICK01732I MAP FUNCTION NOT SUPPORTED FOR THIS DEVICE TYPE
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0
ICKDSF - VSE DEVICE SUPPORT FACILITIES 17.0 TIME: 12:37:17
12:37:17 03/17/23
ICK00002I ICKDSF PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 0
1S55I LAST RETURN CODE WAS 0000
EOJ NEWDASD MAX.RETURN CODE=0000 DATE 03/17/2
*PARTIAL END PRINT
Once you have a VTOC plotted down, you need to define a space to the VSAM catalogs you want to use the DASD for. To do this, go to FILE AND CATALOG MANAGEMENT and pick option 5 Display or Process a Catalog, Space
Define a space to the catalog you want to add the DASD to (I've used the master catalog on my setup), and fill out the form as below:
IESFILSDEF DEFINE CATALOG SPACE
CATALOG ID: VSAM.MASTER.CATALOG
CATALOG NAME: IJSYSCT
VOLUME NAME...................... CBR000 Volume for space definition
ALL FREE SPACE ON THIS VOLUME.... 1 1=Yes (all available space is used)
2=No (No will display detailed
free space information)
GIVE ALL SPACE TO CURRENT FILES.. 1 1=Yes
2=No
FAT-3390 DISK.................... 2 1=Yes (VSAM uses up to 65520 cyl.)
2=No (VSAM uses up to 10017 cyl.)
PF1=HELP 2=REDISPLAY 3=END 4=RETURN
Submit immediately, and check the console and list queue for success.